Combi antenne WLAN 24 58 MIMO3 LP/S
Sale
- €100,67 €126,89
- Excl. BTW: €83,20
- Beschikbaarheid:Niet op voorraad
- Merk: Hirschmann
- SKU: 24951001001
WLAN / Bluetooth / DRSC combiantenne met SMA connector
3 x WLAN 2,4 GHz and 5,8 GHz
3 x SMA Male connector
2400- 2484 MHZ
5150-5925 MHZ
WLAN 2458 LP/S MIMO3 Screwable Low Profile Antenna Ord.code 951 001-xxx 3 x WLAN 2,4 GHz and 5,8 GHz
• Mounting on any surface (e.g. plastics, metal …) • For WLAN networks (2,4 GHz or/and 5,8 GHz) • Public transport or M2M application - telemetering, remote,, maintenance, …
Technical data
Electrical Specification Frequency range Bluetooth: IEEE 802.11 b, g: IEEE 802.11 a, h: IEEE 802.11 n:
IEEE 802.11 p:
2400 - 2484 MHz 2412 – 2484 MHz 5150 – 5725 MHz 2400 – 2484 MHz 5150 - 5725 MHz 5755 – 5925 MHz
Impedance 50 Ohm VSWR ≤ 1,5 Polarization linear, vertical Gain (linear gain, vetical polarization) > 3 dBi * Load capacity IEEE 802.11 b, g: IEEE 802.11 a, h: IEEE 802.11 n:
IEEE 802.11 p:
≤ 200 mW ≤ 1000 mW ≤ 200 mW (2,4 - 2,84 GHz) ≤ 1000 mW (5,1 - 5,72 GHz) ≤ 8 W EIRP (5,79 - 5,81 GHz) ≤ 2 W EIRP (5,85 - 5,92 GHz)
* dBi: referenced to an isotropic radiator Rights of modification reserved (Check général conditions on HCC web site)
Installation Instructions
WLAN 2458 LP/S MIMO3
Ord.code 951 001-xxx
Mechanical Dimensions ca. 124 mm x 80 mm x 31 mm Housing Materials ASA-PC Weight 300 g Temperature range Operations temperature range - 40 + 85° C Storage temperature range - 40 + 85 °C Housing protection class IP66 (acc. IEC 60529)
Versions
951 001 001 140/170/200 +30mm RG 174 low loss / SMA male straight
Technical drawings
Installation
Version 1
• Take the necessary electrostatic precautions for a connection of electronic components (Potential ESD < 1 KV) • Surface must be flat (maximum radius 1mm per meter) , max thickness 10 mm • No metallic (conductive) surface above the antenna • Connectors are not waterproof, so area below the antenna must be dry • Drill a hole (diameter 15 +4/-0,5mm) (clean with isopropyl alcohol or similar) • Screw the nut on the grounding plate (Torque 5 Nm +0-20%) • No adjunction of any material (silicones, glue, …) • Check that the coaxial cable is not electrically charged (Potential ESD < 1 KV) • Connect the coaxial cable connector by hand without forcing (Torque 1 +/- 0,15 Nm = hand made) • Check that the wires respect the appropriate way, not pulled / stressed / bended < 25mm radius / touching aggressive parts
124 mm
80 mm
31 mm
3 x WLAN 2,4 GHz and 5,8 GHz
3 x SMA Male connector
2400- 2484 MHZ
5150-5925 MHZ
WLAN 2458 LP/S MIMO3 Screwable Low Profile Antenna Ord.code 951 001-xxx 3 x WLAN 2,4 GHz and 5,8 GHz
• Mounting on any surface (e.g. plastics, metal …) • For WLAN networks (2,4 GHz or/and 5,8 GHz) • Public transport or M2M application - telemetering, remote,, maintenance, …
Technical data
Electrical Specification Frequency range Bluetooth: IEEE 802.11 b, g: IEEE 802.11 a, h: IEEE 802.11 n:
IEEE 802.11 p:
2400 - 2484 MHz 2412 – 2484 MHz 5150 – 5725 MHz 2400 – 2484 MHz 5150 - 5725 MHz 5755 – 5925 MHz
Impedance 50 Ohm VSWR ≤ 1,5 Polarization linear, vertical Gain (linear gain, vetical polarization) > 3 dBi * Load capacity IEEE 802.11 b, g: IEEE 802.11 a, h: IEEE 802.11 n:
IEEE 802.11 p:
≤ 200 mW ≤ 1000 mW ≤ 200 mW (2,4 - 2,84 GHz) ≤ 1000 mW (5,1 - 5,72 GHz) ≤ 8 W EIRP (5,79 - 5,81 GHz) ≤ 2 W EIRP (5,85 - 5,92 GHz)
* dBi: referenced to an isotropic radiator Rights of modification reserved (Check général conditions on HCC web site)
Installation Instructions
WLAN 2458 LP/S MIMO3
Ord.code 951 001-xxx
Mechanical Dimensions ca. 124 mm x 80 mm x 31 mm Housing Materials ASA-PC Weight 300 g Temperature range Operations temperature range - 40 + 85° C Storage temperature range - 40 + 85 °C Housing protection class IP66 (acc. IEC 60529)
Versions
951 001 001 140/170/200 +30mm RG 174 low loss / SMA male straight
Technical drawings
Installation
Version 1
• Take the necessary electrostatic precautions for a connection of electronic components (Potential ESD < 1 KV) • Surface must be flat (maximum radius 1mm per meter) , max thickness 10 mm • No metallic (conductive) surface above the antenna • Connectors are not waterproof, so area below the antenna must be dry • Drill a hole (diameter 15 +4/-0,5mm) (clean with isopropyl alcohol or similar) • Screw the nut on the grounding plate (Torque 5 Nm +0-20%) • No adjunction of any material (silicones, glue, …) • Check that the coaxial cable is not electrically charged (Potential ESD < 1 KV) • Connect the coaxial cable connector by hand without forcing (Torque 1 +/- 0,15 Nm = hand made) • Check that the wires respect the appropriate way, not pulled / stressed / bended < 25mm radius / touching aggressive parts
124 mm
80 mm
31 mm
| Meer informatie | |
| Accessoiremerk | Hirschmann |
| Antenne assortiment | Combi antenne |
| Antenne bevestiging | Schroef ( incl. kunststof) |
| Antenne Combi selectie | DRSC / WLAN / Bluetooth |
| Connectortype A (M/F) | SMA Male |
| Connectortype B (F/M) | SMA Male |
| Connectortype C (F/M) | SMA Male |
| Kleur.. | Zwart |
| Netwerk / Antenne Frequentie | DRSC 5,79 - 5,81 GHz , WLAN of Bluetooth 2400 - 2484 MHz |